If you search for gasification and terms like “wood stove†on video sharing sites these days you will see demonstrations of wood being burnt in little stoves which seem to something almost miraculous and quite different from our idea of wood as a fuel. These little boilers light rapidly, produce no detectable smoke after the initial lighting and firing, and burn very hot.
So what is the technique which is being used, and how might it help us all in weaning society off fossil fuels?
What you have seen is a method of gasification. It differs from combustion in that it uses just 20% to 30% of the air or oxygen necessary for complete fuel combustion. During gasification, the amount of air supplied to the gasifier is carefully controlled with the effect that only a small part of the fuel burns completely. Trials of this process have illustrated that up to 70% of the energy value of the fue used can be recovered as what is known as synthesis gas, or syngas. This producer gas can also be used for various applications similar to natural gas.
This is a part of the magic, and not one really shown in the YouTube type videos, but it makes this method even more useful. This is due to the fact that syngas can be put to useful work, in both drying the feed fuel prior to gasification and after collection and storage it can be used as a fossil fuel replacement, and renewable energy source. When a gasification plant also includes Combined Heat and Power (CHP) and/or electricity export from the site, the gains are even more impressive.
Gasification in addition promises to be the most efficient long-term solution for capturing carbon while utilizing these valuable feedstocks, and storing the CO2 for very long priods, to reduce or halt global warming.
Gasification of wood and wood-type residues and waste in fixed bed or fluidised bed gasifiers with subsequent burning of the gas for heat production is has become state of the art with designers of thes systems working hard to gain the absolute maximum efficiency out of these systems.
These wood gasifiers which are located primarily in the Scandinavian countries are used almost entirely for space heating heat generation. Gasification of biomass is the renewable fuel system preferred by many, and can be defined as the thermal conversion of solid biomass to gaseous fuel.
Gasification has been around for over a hundred years, but the benefits of biochar are only now being discovered. Furthermore, it is still a wide-open field.
Before electric lighting was available in cities there were street lamps fuelled by gasified coal. It is easy to forget that the process has been reliably used on a commercial scale worldwide for more than 50 years in the refining, fertilizer, and chemical industries, and for more than 35 years in the electric power industry. More than 75 companies involved in the development, licensing, and use of these technologies as well as engineering, construction, equipment manufacturing and production of synthesis gas by gasification from coal, petroleum coke, heavy oils and other hydrocarbons.
Gasification has been proven to be a viable technology for CO2 capture and reducing SOx, NOx, particulate matter, and mercury emissions from coal and petcoke-fired power plants, synthetic fuels production, and chemical facilities.
Plants in this category have been capturing carbon dioxide for several decades in chemical plants in China and the United States. It also has potential contributions to make to both transportation and electrical power energy markets. With ongoing concerns about the price and availability of oil, populous countries like the U.S. gasification has proven to be in high demand and quite successful. However, it can also be used in conjunction with gas engines and gas turbines to obtain a higher conversion efficiency than conventional fossil-fuel electric power generation. Gasification can help meet renewable energy targets, address concerns about global warming, and contribute to meeting global environmental targets.
Steve has built a great web site where there is a lot more information about gasification. This is a hot subject indeed for this technology which has become an essential read for all those in alternative energy and interested in taking action to reduce the impact of climate change.
We’re in this environmental mess because humans have exploited the earth for personal gain. However, you can sell your laptops, get some grocery money and still help the planet.
Steer clear of the attitude that everything is disposable after a few uses; do your part and extract the most out of your electronics. In carelessly tossing away our possessions, we are the reason that one more thing spends an eternity in a landfill. Electronics, including laptops, are one of the most significant sources of toxic heavy metals, including cadmium, lead and mercury, leaking into the soil, according to the Environmental Protection Agency.
Pollutants do no simply stay within the confines of the landfills, but are transported through waterways and through the air. When toxic metals travel upward during evaporation, these toxins contribute to acid rain, spreading the heavy metals for miles. Dr. Lorris G. Cockerham, former professor at University of Arkansas and researcher, wrote that build up of toxic heavy metals in animals damages their vital functions and hinders growth in plants, therefore irrevocably harms ecosystems.
The heavy metals seep into waterways and into our water sources. These heavy metals can enter our body through the ingestion of contaminated water, harming our bodies. Even a low concentration can harm us, according to James Girard, author and professor at the American University.
A solution? Sell your laptops to a recycler. When you sell your laptops, the laptop parts find new life with computer repair shops and wholesalers, avoiding certain doom in a landfill. Selling laptops is an easy process for the average time-constrained American worker. Search for “sell laptops” on the Internet. Locate a recycling company who will accept the laptops you are selling. Lastly, look for the V logo that signifies the company is verified organization, not a Nigerian scam. Many business will offer an instant quote on their Web site for the laptop you are selling. Input the specifications of your laptop, follow directions and you have check or a PayPal payment for your laptops.
Make sure you choose a reputable company to sell your laptops to. Some companies boast a “green” philosophy, but actually ship laptops to landfills in developing countries. We all have a part in this green earth and many of us have take steps to follow the mantra, “reduce, reuse and recycle.” Many people think about selling their cans, bottles and such and don’t think about their computers. Do your part, keep our Earth Green and sell your laptop.
Katy Marie is a freelance writer located in Reno, NV, who wants to keep the Earth beautiful. To find out more visit Cash For Laptops
Technology Environment News 12-14-07 of Dekalb Academy
How often have we come across lovely historical sites suffering from neglect and misuse? Every country needs to take good care of its historic places. Because things like malls, stadiums and highways can be built again. But a historic place which is neglected and misused will lose its glory and slowly disintegrate into zilch. And no amount of action plan or noble intentions can ever bring a historic place back to its former glory when it has been totally neglected and abused by us. The oldest of historic sites can be preserved for the future generations if we have a proper plan for their conservation.
Conversation of historic places requires a systematic approach. If the historic site is conserved with the help of a proper plan, it will show amazing results. While chalking out a plan for the conservation of historic sites, it’s very important to keep the costs under control. If the costs go up to an unwanted level, it will draw criticism from the general public and act like a death sentence for the conservation of other similar projects in the future.
The first thing which should be done by the restoration experts is to check the age of the historic site. This can be easily achieved by conducting a series of scientific tests. It can also be done if there are public or archaeological records of the site. Once we know the actual age of the historic site, we get to know the actual worth of the site - this doesn’t mean that if a site is not very ancient - it’s not worth taking care of.
Also check the sturdiness of the materials which have been used on the historic site. This will need a proper list of all the materials used on all the structures found on the site. Factors such as the effect of temperature, humidity, weathering, fire, air pollution, storms and flood on the material found on the site needs to be studied in detail, so that best possible plan to prevent further degradation of the site can be prepared.
Don’t forget to note the architectural design of any structures present on the site. This is needed to take help of conservation experts according to the style they specialize in. Taking the help of the best of experts who are not competent in the architectural design displayed at the historic site would create a major problem for your conservation project.
Your team of conservation experts also need to keep a track of all the past repairs and changes made on the historic site. The problems faced by the previous restoration team while restoring or repairing the historic site too needs to be researched and noted down. Always remember materials like wood and leather rot quite easily, on the other hand stone articles and pottery items always manage to survive better. Once you have finished your complete study of the historic site, you can then do the restoration part of the site step by step in a phased manner till it is complete. You might even have to restrict the number of visitors, once it has been restored, as although the site has got its former glory, it might not be in a state that it can be exposed to an endless number of people everyday.
For more information on the historical sites of the world, visit Matt’s website about world historical sites, especially his favorite place, tikal.
Noise and vibration control is an issue that is much more common than one might originally think. In fact, it can creep up in the most unlikely of places. A good case in point is animal lab environments. Indeed, ALN Magazine recently ran an article titled “Noise & Vibration Considerations for the Animal Lab Environment.” Therein, the publication pointed out, “In the lab animal facility setting, noise, sound, and vibration affect the life cycle, interaction, and behavior of animals.” However, because “the impact of noise, sound, and vibration is a largely undocumented factor in the research,” it’s an often overlooked issue.
“If the sound pressure levels get too high,” the article continues, “there is a negative impact on animals and structures.” Vibration control, however, is just as important to these animals as noise control in that it “is a driving force behind radiated sound.”
Obviously, exposure to noise and vibration can be detrimental to an animal’s hearing, but the risks don’t stop there. “Sound and vibration can [also] have a physical impact on animals.” Even more startling, “Smaller animals are more susceptible to the affects of sound and vibration over time and will adapt or adjust accordingly. In some cases, mutations may result from exposure to undesirable conditions.”
How can animal laboratories mitigate these problems? The magazine notes, “The designers can control items that are constant disturbances that may greatly impact the animal community. Items within the designer’s control include ventilation system design, machinery vibration isolation, wall construction, lighting selection, and computer terminal placement.”
During the design process, animal labs may want to consult with a producer of custom-molded rubber and rubber-to-metal bonded parts for noise and vibration control. A world leader in the creation of rubber molding and rubber-to-metal bonded parts can help to create an environment that is not only safe for the animals being kept there but is also conducive to a healthy work environment for the people who are employed there.
The Vibro-Insulator line of isolators and mounts, in particular, aid in the control of noise, vibration, and shock. Selecting the right type of mount for an individual animal lab’s specific applications can prove tricky, however. That’s why consultation with an expert with reputable qualifications in rubber molding and rubber-to-metal bonding can be very beneficial.
Of course, once professional advice has been obtained, browsing the Vibro-Insulator catalog allows animal labs easy navigation so they can select the correct mount for their application. Rubber Vibro-Insulators come in a variety of styles and sizes to handle most vibration isolation problems. Most of the mount styles are designed to be used in either the compression or shear direction.
Selection of the proper Vibro-Insulator for a specific application boils down to a multi-step mathematical function that an expert can calculate for the lab or into which the lab’s design team can plug the following information:
1. The maximum load that must be supported.
2. The number of mounts supporting the load.
3. The frequency of the disturbing vibration.
4. Any restrictions on the size or style of the mount based on space limitations or assembly considerations.
Carmen Fontana is a Web Services Manager for Western Reserve Internet Services. Karman Rubber is a world leader in vibration control.
Residential solid trash, also called urban solid waste and municipal solid garbage, is refuse that normally comes from households. It is either in solid or semisolid form. There are five general categories of solid garbage that include:
1) Biodegradable waste: food and kitchen
2) Recyclable material: paper, glass, bottles, cans, metals, and certain plastics.
3) Stagnant rubbish : construction, dirt, rocks, and debris.
4) Assorted waste: clothing, plastics,etc.
5) Household hazardous waste: toxic such as paints, chemicals, light bulbs, spray cans, fertilizer and pesticide containers, batteries,etc.
Cities and towns generally contracts out solid garbage removal services. They will submit bids, assess each bid, and recommend a company. The rubbish company will bill the city or town. These companies are privately owned so if a person has a lot of waste after a project such as home renovation, they can hire a garbage removal company to remove the refuse.
Because of environmental regulations and a growing demand for a cleaner environment, junk companies are now performing the following services:
Recycling Programs: Curbside recycling is usually available to all residential customers. Customers will separate their recyclables according to paper and plastics for curbside pick up. Depending on the contract, this is normally done every two weeks. There can be special recycling programs such as Christmas tree recycling. The trees are then made into mulch. Other special programs a town or city can offer are Spring and Fall Clean Ups. They are designed to encourage residents to get rid of large amounts of garbage.
Hazardous Materials: Every year, millions of people accumulate such hazardous waste products as batteries, paints and stains, cleansers and polishes, motor oil, antifreeze, pesticides and herbicides,etc. These are dangerous to the environment, people, and animals. A rubbish removal service is trained to remove these products safely and responsibly. They will sort and categorize the hazardous materials before storing them in containment units. The contracted hazardous waste hauler packs the items in drums and sends them to hazardous rubbish incinerator or other treatment facility for proper disposal. Some materials, such as used motor oil, lead-acid batteries and antifreeze, are recycled.
Compost Services: Many cities and towns offer a compost service. They will provide compost bins for people to place such items as kitchen food garbage, newspaper, and other items that can be composted. A contracted junk removal company will pick up the compost left on residential curb sides.
Energy Recovery Plants: Plants that convert rubbish to energy are popping up all over the country. These plants burn garbage to heat water which produces steam in much the same way power plants burn coal, oil, natural gas, or wood. The steam can cause a turbine to produce electricity. Junk removal companies that have energy recovery plants in their area will make use of these services.
Special Handling waste Removal Services: Cities and towns will have a contracted service to remove large items such as tires, air conditioners, household appliances, and construction debris. Tires are sent to a recycling or recovery facility and household appliances, after chlorofluorocarbon gas removal, are taken to recycling stations.
Individual Contracted waste Removal Services: There are situations where a person has too much waste to be removed by a city or town removal service. They will then enlist the services of a private company. They are trained and certified to dispose of waste, compost, and recycle residential goods. For a nominal fee, a company will come to your home and remove all of your excess trash.
Because of growing environmental concerns, most companies dispose of waste in ways that will have the least environmental impact. You will feel good knowing that you are doing your part to protect and conserve the environment.
It is important for individuals to be mindful of what is in the trash. That way, the environment can be better protected. If you are looking for a junk removal and rubbish company located in the GTA please visit us at: Garbage Removal Toronto.
Our sun is a source of renewable energy called solar energy. To turn solar energy straight into electricity, a solar cell is employed. Solar cell is also known as photovoltaic cell or PV for short. A single solar cell generates only …
Home Solar Panels- A Comprehensive Guide How To Make Solar Panels A Guide to The Pool Solar Panel Roof Solar Panels- A Comprehensive Guide Solar Panel Kit- A Great Product A Useful Guide About Solar Power Installation …
SunEdison, a leading worldwide solar energy services provider and subsidiary of MEMC Electronic Materials, Inc., was awarded a ground-mounted 14.5 megawatt (MW) solar service contract with Davis-Monthan Air Force Base (DMAFB) in Tucson, …
One of the simplest and cheapest things you can do to green your home is to install a Solar Powered Clothes Dryer…also known as a clothesline! For less than $10, the cost to buy a rope and some clothes-pins, you can enjoy fresh …
Finishes are coatings that are applied to the external and inside surfaces of walls to protect them from the elements and from wear and tear. They also improve the appearance of the structure and are used to enhance the design of rooms.
Petroleum, our main source of oil-based wood finishes and paint, is a non-renewable resource. There are now paints and finishes on the market that are derived from a renewable resource, which in a small way, helps to reduce dependence on oil, and contributes to a more sustainable world.
The basis for these products is whey, which is a product of cheese making, and which has a high biochemical oxygen demand (BOD). This increases the burden on waste treatment facilities, and can also pollute our natural water sources. In the last ten years, this by-product has been used for many new purposes, one of which is natural wood finishes.
When choosing paints for your decorating, use the low or no VOC (volatile organic compound) paints. For hundreds, no, thousands of years, earth, clay and lime have been used, both in hot and cold areas of the world. And now this knowledge is being readapted for contemporary use. If you do any redecorating or new building, it makes sense to contribute to having green, healthy surroundings.
Low and no VOC paints have less smell and less impact on air quality. EPA studies have shown that indoor air quality is up to five times more toxic than outdoors, mainly because of toxic emissions from paint and finishes. This particularly affects anyone with allergies, asthma, or chemical sensitivities. With the new “green” paints, there will be lower contamination of landfills, groundwater, and the ozone.
Switching will not cost you more. Cleanup is easily done with soap and water, instead of toxic chemicals, and brushes can easily be cleaned and reused. The paint is still washable, and is far less harmful to you, your pets, and the environment.
Lisa is a freelance writer with a specialty in Internet content and SEO articles. She has written thousands of articles, hundreds of ebooks and thousands of website pages and related content. She has also authored her own books and works as a consultant to other writers, Internet marketers and Internet businesses.
Professional wordsmith for hire: gamer, wife, mother, entrepreneur, published poet, co-owner of game guides company (http://www.liti4.com), public speaker and Internet business consultant. You can learn more or follow Lisa’s blog from her website: http://www.freelancewriter4hire.com
The newly formed Obama administration has listed greenhouse gas (GHG) tracking and reporting as a major goal, with the objective of protecting the future of the environment by reducing today’s carbon footprint. If no action were taken, the makeup of the earth would significantly altered. Future actions will establish a market drive carbon cap and trade program to drive GHG emissions reductions.
Greenhouse Gas tracking is outlined in The Climate Registry Protocol, which details the requirements for mandatory monitoring and tracking. The premise around greenhouse gas tracking are included in the U.S. Clean Air Act, aimed at improving air quality and lowering greenhouse gas emissions.
The Environmental Protection Agency (EPA) proposes mandatory reporting of the gases contributing to global climate change from about 13,000 facilities nationwide. These facilities account for the majority of greenhouse gas emissions within the United States and present a logical starting point for emissions reductions in the US. The regulation would cover companies that either release large amounts of greenhouse gases (GHG) directly or produce or import fuels and chemicals that when burned emit large amounts of carbon (CO2) gases.
One of the major focuses of the Greenhouse Gas tracking protocol is refrigerant gases used in refrigeration and cooling systems by numerous facilities, including manufacturers, food processors, retailers, grocery stores, office buildings, municipalities and hospitals, just to name a few. Because of their chemical makeup, refrigerant gases contain significant levels of carbon in the form of chlorofluorocarbons (CFCs), hydrochlorofluorocarbons (HCFCs) and perfluorocarbons (PFCs). Use of these compounds has been regulated under the U.S. Clean Air Act for several years.
Greenhouse gases absorb and release radiation into the atmosphere, setting off a global warming effect on earth. The intent and overall goal of GHG tracking relates to better collection and management of the emissions data now so informed decisions can be made about future carbon trading schemes. The tracking protocols also help government entities to more accurately inventory the amounts of emissions reaching the atmosphere. The new GHG legislation puts in motion the data collection, organization, and first stage reporting mechanisms to allow the US to accurately calculate and maintain a GHG emissions baseline across the entire economy. This will allow for better understanding today as well as to determine progress for future Cap and Trade programs. With this accurate information, it can be determined if the guidelines are effective in lowering the harmful effects of these substances to the ozone layer.
Greenhouse Gas tracking involves measuring direct and indirect emissions and keeping extensive records on its usage, maintenance, leak containment and disposal. Heating and cooling systems, as well as other energy consumption, are defined as direct emissions.
Better and more effective GHG management is an objective of the current US government. No longer will the US sit by and watch the world attack the issue of climate change. The US is now taking action to lower carbon emissions to the betterment of future generations. By taking no action, the earth’s makeup would significantly change, with humans and animals adversely affected and marine and plant life severely damaged.
Greenhouse Gas (GHG) management and reporting is now falling under the EPA regulations contained within The U.S. Clean Air Act because the causes of global climate change is now well know. Human activities and the use of global warming substances, like refrigerant gases, are all leading to increased global warming. The substances are carbon dioxide, chlorine, bromine, nitrous oxide, chloroflurocarbons, hydrofluorocarbons, methane, methyl bromide, methyl chloroform, sulfur hexafluoride, hydroxyl, perfluorocarbobs, halons, carbon tetrachloride, fluorine, and the fluorinated gases hydrofluorinated ethers and nitrogen trifluoride. The mandatory law is aimed at reducing the use of these substances to lower the effects of global warming.
Beginning in 2010, GHG management, tracking, and reporting will be environmental law for the highest emitting facilities. Part of the management will revolve around better tracking and reporting of refrigerant gases. Entities must submit usage reports and service records for all refrigerants having high GWP. Special calculations are applied to refrigerants when any leads occur. The GHG emission reporting rules and related protocols allow for progressive companies to take advantage of software already created to help with carbon emissions reporting. Some web applications allow organizations to track GHGs to the asset level across global, distributed facilities.
Software provided by Verisae tracks carbon dioxide (CO2) gas emissions according to The Climate Registry protocols across all sites so companies can manage their carbon emissions and work towards reducing their carbon footprint. To learn more effective refrigerant management tactics and the tools, you can research http://www.Refrigerant-Tracker.com
Is Australia’s Emission Trading System Going to Work Effectively
In Australia the government are introducing an emission trading or cap and trade scheme. There are major concerns about the level of reduction the government wants to sign up to and also whether it will actually work.
As Australians we do need to take action about carbon reduction. We are both the most vulnerable continent for feeling the effects of global warming and also we are the worst greenhouse emitters per head than any other country on the planet. We emit even more than the USA and Canada who are our nearest competitors for this wooden spoon. This is at least in part due to our huge coal industry.
The head of the Australia Institute’s Think Tank says that the Federal Government’s emissions trading scheme will have too many permits and will not reduce carbon emissions.
The Australia Institute’s executive director, Dr Richard Denniss, said the scheme’s flaws related to the 5 to 15 per cent emissions reduction targets, which he described as ”ridiculously low”, and he said there would be too many permits. Dr Dennis said that “We won’t achieve the policy goal, which is to reduce emissions.”
Dr Denniss told the Senate that ”[If] we pass this legislation, we’ve got it for the next 10 years. And anyone that’s got a good idea a year later, it’s not going to help. This legislation is designed to not be tinkered with.”
Professor Clive Hamilton, from the Centre for Applied Philosophy and Public Ethics, said the proposed scheme had damaged Australia’s reputation. A reduction target of at least 25 per cent needed to be set if the Government wanted credibility on the world stage. Australia would be better off taking no policy than the proposed model to the December climate change talks in Copenhagen, he said.
”It not only lowers the ambition of the world community but also excludes Australia from being a forceful player in negotiating … a strong international agreement.”
It is hard to see how exempting large emitters ignoring the 1.9 million small to medium businesses is going to help us reduce our carbon footprint. These same small businesses are currently suffering from financial stress, the business owners and managers are overworked and simply don’t feel able to handle anything new. Many don’t really understand what global warming is about or why it matters.
We urgently need unambiguous communication so that small to medium businesses accept the reality of the need for change and also how easy it can be to make significant reductions with minimal time input and save money at the same time.
We also need to help low income households reduce their carbon footprint with more efficient heating and cooling and effective public transport. We should NOT be giving them even more cash hand outs as “compensation” as currently promised by the government. All households need to come on board and stop wasting power.
We need a clear message that going green applies to all of us, is easy and saves money - just “go for a grumpy walk and just turn it off”. If every small business and householder just went around each office and home and did this it would be relatively easy for every one to reduce their carbon emissions and their power bill by 15-20%. At present we are told it will be difficult and it only applies to big business. Such a wrong message - we all need to pull together.
A Brief given to the Victorian Government advises that the state should only bother with green measures if they are more cost-effective than alternatives. They have been told to rethink programs such as subsidies for solar farms and hybrid car fleets because these will not contribute to any additional emission cuts under the federal scheme.
The Greens have concerns about the cost of emission permits being reduced by the actions of households, councils and governments, hence reducing industry’s incentive to cut emissions. This is more than simply an economic debate. Individuals and households should also be reducing their emissions. Achieving sustainability is a grassroots exercise that involves the entire community, and Australians are becoming aware of the need to remake the economy and society. The momentum must not be lost.
An additional concern is whether the legislation and also the international agreements reached in Copenhagen will be flexible enough to take account of emerging technology. At present this does not appear to be the case. Senator Wong, the Minister for Climate Change, rejected spending on biochar, a form of carbon capture in soil research because that is not listed in the protocol. Thankfully some soil carbon storage research will now be funded in the agriculture budget but that begs the requirement for the legislation to be flexible and allow for new and future technology.
If the ETS cannot deliver real carbon reductions it is really a form of “greenwash” saying we signed Kyoto and have done something before the next election. The big problem is that the government looks ahead 3 years to the next election, Big Biz CEO’s also look to the short term of their contracts and bonuses. Who looks ahead for our children?
Jean Cannon is an energy management and sustainable business consultant. If you would like more information about how to go green in your home or business and increase your business profits why don’t you go to http://www.itiseasytobegreen.com and download a chapter of my book of almost the same name and find out how to reduce your carbon footprint.
Sure, this is a little messier than the easier, disposable version. However, do you even realize the amount of disposable diapers that are filling landfills?? Cloth diapers are a choice that every mother should seriously consider. Let’s look at some facts that are quite alarming…
Disposable Diapers Sobering Facts:
* from birth to about 2-1/2 the average child will go through about 7,300 diapers
* the cost for that is about $2600
* 18 billion diapers enter landfills each year
* disposable diapers make up about 3.4 million tons of trash
* health risks such as fertility issues in males, eyes, nose and throat issues and even asthma-like symptoms have been connected to disposable diapers!
* long term negative affects on animal and water life.
* the chemicals that make disposable diapers white increase the risk of cancer
* affect development
* they use more water. yep. you may need to wash cloth diapers, however, way more water is used making disposable diapers!
* a study, conducted by Anderson Laboratories in 1999 and published in the Archives of Environmental Health, found that disposable diapers release chemicals called volatile organic compounds (VOCs), including toluene, ethylbenzene, xylene and dipentene. They have been shown to have toxic health effects, such as cancer and brain damage, when used over time or high exposure.
* they use 1.3 million tons of wood pulp. that’s about 1/4 million trees every year.
* they take up to 500 years to break down.
* more viruses than you want to know about…including polio, survive for two weeks or more after disposed of.
There are many many many more reasons to avoid disposable diapers. However, I think our readers are intelligent and the above information is enough to get you thinking! Research for yourself. You will be shocked!
Go for organic natural reusable cloth diapers. You will not only be helping the environment and saving money, you will also protect your sweet precious love bugs from harm!
About the Author: Cindy Taylor is a Christian stay at home Mom who love the Lord and cares about God’s planet. You can see her passion and writing at her website, Green Christian Network (http://greenchristiannetwork.com).
It will take all of us to make a significant impact in the world against global warming. The earth is in trouble because of the pollution that we may have caused. It would seem that we are apathetic to the earth’s plea for help. Every natural disaster that is happening to the world, to us, is caused by us. We may have caused it directly or indirectly.
One of the more significant effects of the damage that we have caused this planet is global warming. We may have been feeling how it is a little warmer, how the seasons are all in disarray. It is cold when it should have been hot and it is hot when it should have been cold. Typhoons are also stronger than ever before, aside from the fact that it is more frequent. And haven’t you noticed how a little rain could cause floods? Don’t you find that weird? Well, these are all the effects of global warming and we should be alarmed by it.
That is why natural and environmental causes such as the earth day should be supported because aside from minimizing the use of electricity which is by the way one of the causes of global warming. It brings about social awareness to inform those who are oblivious to what is happening to the world and it re-educates those who are aware. Information is the key and it may be the cure if we do it together. Great things are going to happen. Just the recent earth day brought about great changes that will be felt by the people for generations to come. Can you just imagine the positive effects that this will bring to mankind? Earth will benefit if it continues yearly. Who knows maybe one day global warming will no longer be a problem.
Go To: moveto.ws - Why you should never pay retail price for solar panels. # How to reduce your electricty bill by 80% (or eliminate it completely!) # The.
Well, if it isn’t enough that the Europeans and various other parts of the world consider us to be Ugly Americans, each one of us need to do are part for the.
Sungevity has been quoted as offering to install FREE solar panels on the White House, but no response comes from inside the Obama Administration, which reflects timidity and contradicts Obama’s ‘talk’ about his “New Energy Policy”.